Lightweight Single Pack CoV-2 Saliva Antigen Test Kit 78*34*125MM

Rapid Test Kit Antigen Saliva Rapid Test Kit CoV-2 Antigen Saliva Sample Rapid Test Kit Single Pack Rapid Test Kit

Intend Use
The rapid test kit is intended for the qualitative detection of SARS-CoV-2 antigen in hunman saliva samples from novel coronavirus suspected person with symptoms within 9 days from onset. It can be used for early triage and rapid management of suspected populations, but it cannot be used as diagnosis basis of SARS-CoV-2 infection. Further nucleic acid detection should be carried out for suspected population whose antigen test result is positive or negative.
 
Product Details

 
Product  Feature

• Test results in 15 minutes
• No special/additional instruments required
• Suitable for occasion
• Lightweight and easy to carry

• Main Components
• Test Cassette
• Saliva Collector With Collection Tube 
• Sample Extraction Buffer
• Package Insert

 
Use Step

• Open the cap of the collection tube and istall saliva collector.
• Put the collection tube with saliva collector close to lips and let the saliva flow into the collection tube. Tje volum of saliva needs to be half of 0.5 scal mark(0.25).
• Screw the sample extraction buffer carefully.

• Add all sample extration buffer to the collection tube. Discard the saliva collector, tighten the cap onto the specimen collection tube.
• Shake the specimen collection tube at least three time vigorously to mix the saliva and the extraction buffer. Squeeze bottom of the collection tube ensure the saliva is thoroughly mixed.
• Add 3 full drops of the solution to the sample well(S). Read the result at 15 minutes. Do not interpret the result after 20 minutes.

 
Result Interpretation

• POSITIVE: Two (2) distinct colored lines appear. One line should be in the control region (C) and the other line should be in the test region (T).

• NEGATIVE: One (1) colored line appears in the control region(C). No apparent colored line appears in the test region (T). The negative result does not indicate the absence of analytes in the sample, it only indicates the level of tested analytes in the sample is less than the minimum detection limit.

• INVALID: No colored lines appear, or control line fails to appear, indicating that the operator error or reagent failure. Verify the test procedure and repeat the test with a new testing device.

 
 
Virus Sources

 Other Information

• This kit is a qualitative detection, which cannot determine the exact content of antigen.
• The kit should be sealed and kept away from moisture. Reagents or samples stored at low temperature should be balanced to room temperature before using.
• Do not use samples that have been placed for longer than one hour or contaminated.
• Waste should be treated in accordance with infectious substances and should be discarded properly.
• The extraction reagent contains preservative agent which may be toxic if ingested. When disposed of through a sink, flush with a large volume of water.
• Keep away from children. Any child under age 13 shouldn’t perform the test without parental guidance, or professional aid.

Certificate