Glycosylated Hemoglobin Control LD500 HbA1c Analyzer Obey Laboratory SOP

HbA1c Analyzer Use High Quality Glycosylated Hemoglobin (HbA1c) Control LD-500 HbA1c Analyzer Use

Package Specification

There are two concentrations: Level 1 (low) and Level 2 (high).

Application

Control quality of glycosylated hemoglobin system in HbA1c analyzer.

Storage And Validation

• Stable at 2℃ – 8℃ for 12 months, direct exposure to sunshine avoided.
• Stable for 14 days at 2℃ – 8℃ after open-vial.

Attention: please stop using control if it is obviously contaminated.

Preparation For Use

• Open the vial carefully, avoiding any loss of material.
• Reconstitute by pipetting exactly 100ul of distilled water at +15°C to +25°C, into the vial.
• Close the rubber stopper and leave to stand for 10 to 15 minutes out of bright light before use.
• Swirl gently several times during the reconstitution period to ensure that the contents are completely dissolved.
• Prior to use, mix the contents by inverting the vial. Do not shake the vial as the formation of foam should be avoided. Ensure that no lyophilized material remains unreconstituted.
• Please close the rubber stopper after drawing the sample and put in the refrigerator soon to avoid containment and evaporation.

Cautions

• Store per request and use it within the validation. The reagent out of validation should be dealt with in experimental waste way.
• Different reagents with different lots can’t be cross used.
• Reagent box is for IVD use only and obey the laboratory SOP.