HbA1c Analyzer LD-560 Labnovation Latest Analyzer For HbA1c Testing HPLC Method Dual Mode For Operation

HbA1c Analyzer LD-560 Labnovation Latest Analyzer For HbA1c Testing HPLC Method Dual Mode For Operation

Intended Use

The Fully Automated HbA1c Analyzer is used in conjunction with suitable reagents for the quantitative detection of glycosylated hemoglobin (HbA1c) in human blood.

Specifications

Advantage

• HPLC: The most recognized principle for HbA1c testing, CV<2%.
• Full Automation: Autoloader for 20 tubes, Automatically recognizing sample type, and switching the testing mode,
• Just one click to start testing.
• Smart System: Robust computing system, Automatic scanning of barcode, Automatic sample type recognition, Reagents level alarm.
• Quality & Performance: IFCC and NGSP certification, Control & Calibrators from the original manufacturer
• Convenient Operation: Auto washing for self maintenance at startup, 10" LCD touch screen to provide rich information, Easy to change reagents.

Reagents and Consumables

• Eluent A/Eluent B/Eluent C: Adjusts the pH of the solution for the elution of glycosylated hemoglobin and non-glycated hemoglobin.
• Hemolysis Reagent: Used to dissolve red blood cells and release hemoglobin.
• Chromatography column: Used for separation and elution of glycosylated hemoglobin and non-glycated hemoglobin.
• Filter: Used to initially filter the sample after hemolysis.
• Paper Rolls: Prints a report of the test results.

Operation Preparation

Before operating this analyzer, please read the operation manual carefully to avoid malfunction or damage.

If the analyzer is used in a manner not specified by the manufacturer, the protection provided by the analyzer may be destroyed.

Before turning on the analyzer, the operator must check the following requirements to ensure that the system is ready.

(1) Check the remaining amount of reagents

Check whether the remaining amount of eluent A, eluent B, eluent C and hemolysis agent is sufficient.

(2) Check the waste liquid barrel

Check whether the waste liquid barrel has been emptied before starting the analyzer every day.

(3) Check the liquid tubes and power supply

Check whether the tubes of reagent and waste liquid are bent and whether the connections are reliable.

Check the analyzer for fluid leakage.

Check whether the power plug of the analyzer is securely inserted into the power socket.

(4) Check the printer

Check whether the paper roll is sufficient and whether it is installed in correct place.

Certificated Display