Simple Operate SARS-CoV-2 Antigen Rapid Test Kit For Mutations Detection

Rapid Antigen Test Kit SARS-CoV-2 Antigen Rapid Test Kit Simple Operate Professional Testing Rapid Test Kit

Intend Use
This rapid test kit is intended for the qualitative detection of SARS-CoV-2 infection from patients. It is an aid in the diagnosis of the patients with suspected SARS-CoV-2 infection in conjunction with clinical presentation and results of other laboratory tests. Results from this test kit should not be used as the sole basis for diagnosis. The test provides preliminary test results and should not be used as the sole basis for treatment or other management decision. Professional use only.

Product Details

Product  Feature

• Sensitivity and specificity are higher
• Short time and simple operation
• Safe and stable
• Detection of mutations

 
 
 
Main Components

• 20 Test Cassettes
• 20 Sample tubes 
• 2 Sample extraction buffers
• 20 Swabs
• 1 Instruction for use

 Sample Collection

• Nasopharyngeal swab:Holding the swab with the other hand, sticks the swab to the nostril to enter, and slowly penetrates backwards along the bottom of the lower nasal passage, so as not to exert too much force to avoid traumatic hemorrhage. When the tip of the swab reaches the posterior wall of the nasopharynx cavity, gently rotate it for several times (in case of reflex cough, stop for a minute), and then slowly take out the swab.
• Oropharyngeal swab: The head of the person to be collected is slightly tilted and his mouth is wide open, exposing the pharyngeal tonsils on both sides. Wipe the swab across the root of the tongue. Wipe the pharyngeal tonsils on both sides of the person to be collected back and forth with a little force for at least 3 times, and then wipe up and down the posterior pharyngeal wall for at least 3 times.

Use Step

• Add 550μL sample extraction (about 22-24 drops) into the sample tube.
• Insert the swab into the sample tube prefilled with extraction buffer. Mix well and squeeze the swab 10-15 times by compressing the wall s of the tube against the swab.
• Roll the swab head against the inner wall of the tubes as you remove it. Try to release as much liquid as possibe. Dispose of the used swab in accordance with your biohazard waste disposal protocol.
• Close the cap of the sample tube.
• Add 3 full drops of the mixed solution vertically into the sample well (S) of the test cassette.

 
Result Interpretation

• POSITIVE: Two (2) distinct colored lines appear. One line should be in the control region (C) and the other line should be in the test region (T).

• NEGATIVE: One (1) colored line appears in the control region(C). No apparent colored line appears in the test region (T). 

• INVALID: No colored lines appear, or control line fails to appear, indicating that the operator error or reagent failure.

 

 
Virus Sources

 
Certificate