Hematology Analyzer Reagents excellent Performance Hematology Reagent For Nihon Khoden 3 Part Diff Analyzers

Hematology Analyzer Reagents Excellent Performance Hematology Reagent For Nihon Khoden 3 Part Diff Analyzers

Intended Use

To be used for blood cell counting, sizing, and WBC differentiation, hemoglobin determination on Nihon Khoden 3 part diff hematology analyzers. This product is for In Vitro Diagnostic Use only.

Applicable Instument

For use with Nihon Kohden MEK-6318,MEK-6400,MEK-6700, MEK-6410,MEK-6420 hematology analyzers.

Procedures

• Remove all the reagent aspiration tubes from the currently used reagent boxes.
• Wipe the tube’s surface with a lent free tissue, and then rinse with distilled water. Put the tubes into Labnovation reagents boxes or bottles.
• Run at least 50 backgrounds. Check for the acceptable background values. At first background counts can be seen, that should lower to normal after a few runs.
• Run all three levels of a dedicated commercial control. Check for the acceptable values.
• Recalibrate the unit if necessary.

• Re-calibration is recommended when changing the origin of the reagents.
• It is not recommended using different brands of solutions together on one unit of analyzer.
• Do not ingest. Avoid contact with skin and eyes.
• Skin contact: Flush with plenty of water.
• Eyes contact: Flush with plenty of water. Obtain immediate medical attention.
• This kit is for professionals and in vitro diagnostic use only.

Specification

41-10-020	Diluent NK	20L
41-30-A05	Lyse NK	500ML X3
41-40-005R	Rinse NK	5 L
L-0401005	Cleaner-C	500ML

 

KIT COMPOSITION

DILUENT NK	NaCl≤9.4%, Buffer≤1.6%, Anti-Microbial Agent≤1.0%
CLEANER-C	Sodium Hypochlorite 5%
LYSE NK	Quaternary Ammonium Salt<10%, Sodium Lauryl Sulfate<1.5%
RINSE NK	Buffer<0.9%, Sufurctant<1.0%

 

 Storage

Store the product at 5-35℃ in a dust free place with good ventilation. Temperature outside the range may damage the product.

The open vial life of the product is 30/60 days. Unused reagents should be discarded after 30/60 days. Do not mix residual with a new carton.

Advantage

• One source for all brands of analyzer 
• Reagents for both 3-parts and 5-parts
• Ready-to-use final products and bulk OEM reagents
• ISQ13485:2003 and ISO9001:2008 certified
• CE marked, FDA cleared
• Well-established brand used by thousands of lab in 95 countries
• High quality, high performance and high fidelity of correlations with original brand